Create a Virtual Router

Limitations

info

• A router can only connect networks that have IP management enabled.

Create a Virtual Router

1. On the "Routers" page, click "Add New".

2. In the "Create a Router" page:

   1. Specify a router name.
   2. From the "Network" section , select a physical network through which external access will be provided via an external gateway. The new external gateway will pick an unused IP address from the selected physical network.
   3. In the "Add an internal interface" section, select one or more virtual networks to connect to a router via internal interfaces. The new internal interfaces will attempt to use the gateway IP address of the selected virtual networks by default.
   4. Select or deselect the SNAT check box to enable or disable SNAT on the external gateway of the router. With SNAT enabled, the router replaces VM private IP addresses with the public IP address of its external gateway.

3. Click "Createa A Router" .